DRIVERS

These drivers were specifically designed to produce RF power levels and frequencies that are compatible with Isomet acousto-optic devices. All fixed frequency models contain crystal controlled oscillators and have been optimized for maximum stability and long term reliability. Digital modulation models accept TTL logic input levels and permit On:Off amplitude control. The analog models allow proportional amplitude control. The variable frequency deflector drivers have been designed for optimum tuning linearity and power flatness.

Fixed Frequency Modulator Drivers

Center Freq (MHz)

Risetime (nsec)

Digital Modulation

Analog Modulation

27

<10

   521C-27

.

531C-27

.

40

<8

521C

.

531C

.

45

<8

521C-45

.

531C-45

231A-1-45 *

80

<6

522C

222A-1,-2*

532C

232A-1,-2 *

110

<5

523C

223A-1,-2*

533C

233A-1,-2

150

<5

524C

224A*

534C

234A*

175

<5

525C-175

225B-1-180*

535C-175

235B-1-180*

200

<5

525C

225A/B-1

535C

235A/B-1

250 (260)

<5

526C

226A-1*

536C

236A-1*

350

<5

.

.

537C

.

*Above NOT recommended for new designs.

The 5xx drivers above are available with BNC connectors. The case is slightly larger drawing here

Other frequencies available on request.


Variable Frequency Deflector Drivers

Tuning Frequency (Minimum, MHz)

Digital Modulation

Analog Modulation

Tuning Linearity (Typical, %)

RF Power (W)

30-50

620C-40

630C-40

±1.5

>2.2

60-100

620C-80

630C-80

±1.5

>2.2

70-130

620C-100

630C-100

±1.5

>2.0

80-140

620C-110

630C-110

±1.5

>2.0

100-200

620C-150

630C-150

±1.5

>2.0
140-260
±1.5
>1.8
30-50 / 40-60
±1
1.8 / 1.8
50-90
±1
1.8 / 1.8
75-125 / 90-130
±1
1.8 / 1.8

120-240 /130-250

D325-BS

D335-BS

±1

1.8 / 1.8

Please select by comparing the center or tuning frequencies with AO device specification.

The Drivers below are available until stocks are exhausted
Tuning Frequency (MHz) Without modulation With modulation Tuning Linearity (%) RF Power (W)
30-50
.
±1
>1.0*
57-103
±1
>1.0*
82-138
±1
>1.0*
125-175
.
±1.5
>1.0
150-300
.
±1
>1.0

 

Follow this link for alternative driver solutions, including high power fixed and variable frequency driver-amplifiers

Application Notes and Manuals  

All specifications are subject to change without notice

Isomet Home